Syarikat Motosikal Honda Malaysia bkal mengeluarkan sebuah lagi model CBR dalam pasaran di Malaysia yang ber-CCkan 240cm padu...
Model ini juga dikeluarkan bersama CBR 250R dimana ia dilengkapi dengan ABS..
nasib baik ak x da duit.. klo tak.. motol ni bakal aku ronggen di atas tar jalan raya..
Model Name | CBR250R | ||
Model Type | Honda MC41 | ||
Overall length x Overall width x Overall height | 2.035 m x 0.720 m x 1.125 m | ||
Wheelbase | 1.370 m | ||
Ground clearance | 0.145 m | ||
Seat height | 0.780 m | ||
Curb weight | 161 kg (STD) | 165 kg (ABS) | ||
Riding capacity | 2 people | ||
Minimum turning radius | 2.5 m | ||
Engine type | CS250RE, liquid-cooled 4-stroke DOHC Single-cylinder | ||
Displacement | 249 cm3 | ||
Bore x Stroke | 76.0 mm x 55.0 mm | ||
Compression ratio | 10.7 | ||
Fuel supply system | Programmed fuel injection system (PGM-FI) | ||
Starter type | Self-starter | ||
Ignition type | Full-transistor battery ignition | ||
Lubricating type | Wet sump | ||
Fuel tank capacity | 13 ℓ | ||
Clutch type | Wet multi-plate with coil springs | ||
| 3.333 2.118 1.571 1.304 1.115 0.963 | ||
Reduction gear ratio (primary, secondary) | 2.808 / 2.714 | ||
Caster angle / Trail | 25°00 / 95 mm | ||
| 110 / 70-17M / C 140 / 70-17M / C | ||
| Hydraulic disk Hydraulic disk | ||
| Telescopic Swing arm (Pro-link suspension system) | ||
Frame type | Diamond |
No comments:
Post a Comment